|
|
 |
Seat:==》Product>>>WATER QUALITY ON-LINE INSTRUMENT
|
|
Name: PH-221 Digital pH and Temperature Controller |
|
Product description :
Large screen with backlit display, it features digital
calibration for easy and precise calibration that will
yield better results.
Dual monitoring of pH and Temperature.
|
|
Technology Parameters >>
|
|
|
|
Name: KL-803 Digital pH/ORP Controller |
|
Product description :
Digital pH-ORP controller with large size LED display for
easy reading.
High input impedance avoid measuring error.
Built in SLOPE and CAL. adjust knob, easy for single point
or two points pH calibration.
"PH - ORP" control, the relay "PH" when measuring value
is above the set point for pH.
And the relay "ORP" when measuring value is below the
set point for ORP. |
|
Technology Parameters >>
|
|
|
|
Name: KL-2012 Digital pH and ORP Controller |
|
Product description :
Digital pH-ORP controller with large size LED display
for easy reading.
High input impedance avoid measuring error.
Built in SLOPE and CAL. adjust knob, easy for single
point or two points pH calibration.
"PH - ORP" control, the relay "PH" when measuring
value is above the set point for pH.
And the relay "ORP" when measuring value is below
the set point for ORP. |
|
Technology Parameters >>
|
|
|
|
Name: KL-601 Digital pH/Temperature Controller |
|
Product description :
Dual monitoring of pH and Temp. in large LCD display
and single control of either pH or Temperature. |
|
Technology Parameters >>
|
|
|
|
Name: KL-100 Digital pH Controller |
|
Product description :
Kelilong pH controller offers continuous and accurate
pH reading. It also offers alarm when pH reading is
out of the user preset range.
The alarm feature can be set for either high or low
position. |
|
Technology Parameters >>
|
|
|
|
Name: KL-018 Industrial on-line PH Controller |
|
Product description :
Kelilong Water’s pH Controllers are packaged in a 1/4
DIN panel mount controller box with dual SPDT Hi/Lo
relays, manual set points and calibration potentiometers
set into the front of the pH controller panel. The pH
controllers feature an isolated 4-20 mA current output.
The pH Controllers require a Pt-100 ATC probe or a
simulation resistor for temperature compensation. |
|
Technology Parameters >>
|
|
|
|
4 pages in total， Currently on page 1
【Next】 【Previous】 【Home】 【End】
|
|
|
